MATSUURA MAM 72-25V APC10 | Vintage: 2007
Machining Center - Universal
Control: CNC, Fanuc 30iMMade in Japan
The Matsuura MAM 72-25V APC10 YOM 2007 is a full 5 axis universal machining center with turning and swiveling table and vertical spindle. It is in excellent maintenance condition, and was initially installed in 2012.
The x-travel is 550mm, the y-travel is 410 mm and the z-travel is 450 mm.
The control is a Fanuc 30 iM. The pallet dia. is 130 mm, maximum workpiece height is 250 mm while the maximum diameter is 250 mm and a max. weight of 150 kg. The tool magazine is a 180 BT 40 BigPlus. Tools are allowed to have a maximum diameter of 96 mm, but may got a diameter of 175 mm if there is no neighboring tools. Tools may have a weight of max. 10 kg. The max. RPM of the machine is 15000 1/min
The spindle drive has an output of 15/7,5kW while the torque is 95,4 Nm.
The rapid travel x/y/z is 50 / 50 / 50 m/min, the maximum feed is 50 / 50 / 50 m/min.
Pallets on the twin pallet changer are sized 500 x 500 mm.
Tool measuring and breakage detection is done by a Blum Laser.
Automatic zero point adjusting and automatic cutting power control is possible with this machine.
Measuring probe for work piece is a Renishaw MP 10.
Coolant through spindle works with a 70 bar Knoll high pressure coolant system with paper filter.
There is a coolant shower and a coolant gun.
The program memory has got space of 0,5 MB and register for 1000 programs
The machine comes with polar coordinate input G15/G16 and a Macroprogram G 65-G67 which allows 100 variables.
The total power requirement of the machine 88kVA. The weight of the machine is 15t. A Signal lamp in 3 colors shows the current status of the machine.
The integrated air filter is a LTA AC 3001-R.
A Rotoclear window is integrated.
YouTube Video Link:
Delivery time: Immediately
Freight basis: EXW (Incoterms 2010) free loaded on truck
Storage location: Germany
Details MATSUURA MAM 72-25V APC10x-travel 550mm
control Fanuc 30 iM
Spindle RPM 150001/min
spindle drive 15/7,5kW
c-axis 360.000 x 0,001°
b-axis +10.000/ -110.000x0,001°
rapid travel x/y/z 50 / 50 / 50m/min
Feed x/y/z 50 / 50 / 50m/min
workpiece height max. 250mm
max. workpiece diameter 250mm
workpiece weight kg
Pallet pool with 10 pallets and one set up station
Pallet diameter 130mm
tool magazin: 180 BT 40 BigPlus
tool diameter 80mm
Tool diameter with no neighbouring tools 150mm
tool length - max. 300mm
weight of tools max. 10kg
Tool measuring and Breakage detection by Blum Laser
Automatic zero point: adjusting
Automatic cutting power control kg
Weekly timer for warmup cycle
program memory 0,5 MB
Registrered programs 1000
dimensions of the machine ca. 6,55 x 4,2 x 3,26m
total power requirement 88kVA
weight of the machine ca. 15t
Registered programs 1000
No. of free M-functions 8
Dynamic zero point correction for up to 8 points G54.2
High speed package mit Risc Processor
Corner chamfering and curving
Pre check of tool availability
Coolant through spindle 70 bar with filter Knoll
Measuring probe for work piece Renishaw MP 10
offsets for parts 306
Signal lamp 3 colors
Chip conveyor rear position
Air filter LTA AC 3001-R